SELF-ADHESIVE BUTYL BAND, IT CAN BE PLASTERED
PROTECT
PROTECT is the self-adhesive butyl band that, thanks to the special mixture, guarantees excellent adhesion and deformation capacities, compensating for the natural movement of the timber.
Butyl provides excellent adhesion to substrates even in harsh environmental conditions, for top adhesion and workability even at low temperatures.
PROTECT, THE SELF-ADHESIVE, PLASTERABLE BUTYL BAND FOR YOUR PROJECTS
The PROTECT sheath is durable and thermally stable.
The non-woven polypropylene fabric means the support can be plastered, offering greater versatility of use.
Documents
Technical data sheets
|
|
|---|---|
| Declaration of performance (DOP) | Download |
PROTECT
| CODE | B
[mm]
|
s
[mm]
|
L
[m]
|
B
[in]
|
s
[mil]
|
L
[ft]
|
pcs. |
|---|---|---|---|---|---|---|---|
| MANPLA2080 | 100 | 1 | 10 | 3.9 | 39 | 33 | 6 |
| MANPLA20180 | 200 | 1 | 10 | 7.9 | 39 | 33 | 2 |
| PROTECT330 | 330 | 1 | 10 | 13 | 39 | 33 | 2 |
| PROTECT500 | 500 | 1 | 10 | 19.7 | 39 | 33 | 1 |
Technical Data PROTECT
| Property | Standard | Tested Values | USC Conversion |
|---|---|---|---|
| Tensile strength MD/CD | EN 12311-1 | 115 / 100 N | 25.9 / 22.5 lbf |
| Elongation at break point MD/CD | EN 12311-1 | 100 / 100 % | - |
| Peel adhesion at 180° | ASTM D1000 | 20 N/cm | 11.42 lbf/in |
| Initial Tack | ASTM D2979 | 8 N | 1.8 lbf |
| Resistance to tearing MD/CD | EN 12310 | ≥ 130 / 125 N | ≥ 29.2 / 28.1 lbf |
| Joint separation resistance MD/CD | EN 12316-1 | ≥ 20 N/50mm | ≥ 2.28 lbf/in |
| Maximum tensile force MD/CD | EN 12317-1 | ≥ 100 / 75 N/50mm | ≥ 11.42 / 8.57 lbf/in |
| Adhesion of class C2E cementitious glue on non-woven fabric | EN 12004 / EN 1348 | 0,9 N/mm² | 131 lbf/in² |
| Vertical sliding | ISO 7390 | 0 mm | - |
| Reaction to fire | EN 13501-1 | class E | - |
| Water vapour resistance factor (μ) | EN 1931 | ca. 26176 (MN·s)/g | - |
| Watertightness | EN 1928 | compliant | - |
| VOC emissions | EN 16000 | 30 μg/m³ | - |
| French VOC classification | ISO 16000 | A+ | - |
| Thermal resistance | - | -30 / 90 °C | -22 / 194 °F |
| Application temperature | - | 0 / 40 °C | 32 / 104 °F |
| Storage temperature (1) | - | 5 / 40 °C | 41 / 104 °F |
Specifications
Supply and installation of self-adhesive bituminous band, can be plastered, type PROTECT
CE marking in accordance with: : EN13956
Composition:
Release liner PP film, glue grey adhesive butyl and support non-woven PP fabric
Properties:
- Temperature resistance [°C] : -30/+90
- Reaction to fire : classe E
- VOC emissions (COV) (% (class A+)) : 30 μg/m³
- Application temperature [°C] : 0/+40
- Watertightness [kPa] : conforme
- Water vapour resistance factor μ : ca. 26176
It can be applied on various smooth building substrates such as timber, OSB boards without additional surface treatment. The surfaces must be dry, free of dust and solvents such as grease or oil. We recommend the use of PRIMER for rough surfaces such as rough OSB boards. After the separation film has been partially separated, the tape can be applied easily and precisely at the corner point without further corrections. The sealing is completed by separating the remaining film and adhering the tape to the support. Once the tape has been applied, it is recommended to use the special roller RLL45 to obtain a perfect application.
Composition PROTECT
| SUPPORT | non-woven PP fabric |
|---|---|
| GLUE | grey adhesive butyl compound |
| RELEASE LINER | PP film |
Related products
